Emit the Garmin AV400 protocol required to drive a Garmin 196/296 series GPS Garmin AV400 Protokoll aktivieren, um ein Garmin 196/296 anzusteuern

Emit the set of AV400 strings required to drive a Garmin 400-series GPS from FlightGear Daten des AV400 Protokolls verwenden, um ein Garmin 400-Series GPS durch FlightGear zu steuern

Open connection for "A" channel using Garmin WAAS GPS protocol

Open connection for "B" channel using Garmin WAAS GPS protocol

Specify a path to addon;

Set the ADF1 radio frequency, optionally preceded by a card rotation. Frequenz des ADF1 angeben, optional mit vorangestellter Kompassabweichung

Set the ADF2 radio frequency, optionally preceded by a card rotation. Frequenz des ADF2 angeben, optional mit vorangestellter Kompassabweichung

Select aircraft aerodynamics model to load Wähle das zu ladende Aerodynamik-Modell des Flugzeugs

Enable/Disable AI subsystem (required for multi-player, AI traffic and many other animations.) Disabling it is deprecated.

Add and enable a new scenario. Multiple options are allowed. Ein KI-Szenario hinzufügen und aktivieren (kann mehrfach angegeben werden)

Enable/Disable artificial traffic.

Select an aircraft profile as defined by a top level <name>-set.xml Auswahl eines Flugzeugprofils (wählt ein <name>-set.xml Profil aus)

Specify the exact directory to use for the aircraft (normally not required, but may be useful). Interpreted relatively to the current directory. Causes the <path-cache> from autosave_X_Y.xml, as well as --fg-aircraft and the FG_AIRCRAFT environment variable to be bypassed. Flugzeug-Verzeichnis relativ zum aktuellen Pfad (meist Verzeichnis, in dem fgfs.exe liegt). Umgeht <path-cache> aus autosave_X_Y.xml, und --fg-aircraft und die FG_AIRCRAFT Umgebungsvariable.

Aircraft Flugzeug-Optionen

Specify starting position relative to an airport Startposition relativ zu einem Flughafen angeben

Enable/Disable security flag. Enable means that network connections will be allowed full access to the simulator including running arbitrary scripts. Ensure you have adequate security (such as a firewall which blocks external connections).

Allow Nasal scripts to read files from directories listed as path (separate multiple paths with a semicolon (Windows) or a colon (UNIX)). By default, for security reasons, Nasal scripts can only read data from certain directories, such as $FG_ROOT, $FG_HOME, etc.

Starting altitude Flughöhe (MSL) beim Start

Enable/Disable anti-aliased HUD

Specify a multiplier for the aspect ratio. Einen Multiplikator für das Seitenverhältnis angeben

Open connection using the ATC sim protocol (atc610x) Eine Verbindung per ATC Sim-Protokoll (atc610x) öffnen

Open connection using the Atlas protocol Eine Verbindung per Atlas-Protokoll öffnen

Audio Options Audio-Optionen

Enable/Disable auto coordination

Avionics Options Avionik-Optionen

Specify the bits per pixel Bits pro Pixel angeben

Specify path to your web browser Pfad zum Internet-Browser angeben

Assign a unique name to a player Dem Spieler einen eindeutigen Namen zuweisen

Specify starting position on an AI carrier Auswahl der Startposition auf einem Flugzeugträger

Specify a starting position relative to the carrier where you can use the predefined abeam (start on downwind abeam) or FLOLS (start on final approach) values, or specify the name of the carrier's parking position. Must also specify a carrier.

Create an overcast ceiling, optionally with a specific thickness (defaults to 2000 ft). Erstelle geschlossene Wolkendecke, optional mit einer bestimmten Dicke (Standard: 2000ft)

Enable/Disable clock freeze

Enable/Disable 2D (flat) cloud layers

Enable/Disable 3D (volumetric) cloud layers

Set the COM1 radio frequency Frequenz des COM1-Funkgeräts angeben

Set the COM2 radio frequency Frequenz des COM2-Funkgeräts angeben

Specify the path to XML file for multi-pass rendering. The path is relative to $FG_ROOT (defaults to Compositor/default.xml).

Load additional properties from path Lade weitere Einstellungen aus Pfad

Enable/Disable displaying console (Windows specific) Konsole anzeigen (nur für Windows)

Specify an additional base data directory (FGData), before the $FG_ROOT directory

Debugging Options Optionen zur Fehlersuche

Enable/Disable developer mode

Enable/Disable runway light distance attenuation

Slave the DME to one of the NAV radios, or set its internal frequency. DME an eines der NAV-Funkgeräte koppeln oder seine interne Frequenz einstellen

Base directory to use for aircraft and scenery downloads (the TerraSync scenery directory may be specifically set with --terrasync-dir) Verzeichnis für heruntergeladene Flugzeuge und Szenerie (das TerraSync Szenerieverzeichnis kann extra mit --terrasync-dir angegeben werden)

Environment Options Umwelteinstellungen

Fail the pitot, static, vacuum, or electrical system (repeat the option for multiple system failures). Das Pitot-, Vakuum-, statische oder elektrische System ausfallen lassen (mehrfach für mehrere Systemausfälle möglich)

Select the core flight dynamics model Wähle das grundlegende Flugdynamikmodell aus

Can be one of jsb, larcsim, yasim, magic, balloon, ada, external, or null Entweder jsb, larcsim, yasim, magic, balloon, ada, external, oder null

Flight Model Optionen für die Flugphysik

Features Features

Specify additional aircraft directory path(s) (alternatively, you can use --aircraft-dir to target a specific aircraft in a given directory) Konfiguriert Verzeichnisse mit zusätzlichen Flugzeugen

Specify the root data path Konfiguration des FlightGear Datenverzeichnisses

Specify the scenery path(s); Konfiguriert den Pfad zu den Szeneriedaten;

Defaults to $FG_ROOT/Scenery Voreinstellung ist $FG_ROOT/Scenery

Enable/Disable FGCom built-in

Use a model viewer rather than load the entire simulator Den Modell-Betrachter verwenden, anstatt den gesamten Simulator zu laden

Specify starting position relative to a fix Startposition relativ zu einem Fix angeben

Open connection using the Flarm protocol, which includes NMEA/GPS and traffic reporting messages Ein Verbindung per Flarm-Protokoll herstellen, welches NMEA/GPS und Verkehrsinformationen überträgt

Read all waypoints from a file Alle Wegpunkte von der angegebenen Datei einlesen

Disable fog/haze Nebel/Dunst deaktivieren

Enable fastest fog/haze Schnellere Darstellung von Nebel/Dunst

Enable nicest fog/haze Schönere Darstellung von Nebel/Dunst

Specify field of view angle Das Sichtfeld in Grad angeben

Enable/Disable aborting on encountering a floating point exception Abbruch bei Auftreten eines Fließkommafehlers

Enable/Disable start in a frozen state

Enable/Disable fuel consumption freeze

Enable/Disable fullscreen mode

Open connection using the Garmin GPS protocol Eine Verbindung per Garmin GPS-Protokoll herstellen

General Options Generelle Optionen

Open connection using a predefined communication interface and a preselected communication protocol Eine Verbindung öffnen unter Verwendung eines vorgegebenen Kommunikationsinterfaces und eines vorausgewählten Kommunikationsprotokolls

Specify window geometry (640x480, etc) Fensterabmessungen angeben (z.B. 800x600, 1280x720, etc.)

Specify flight path angle (can be positive) Den Winkel des Flugpfads angeben

GMT

Set graphic options from one of the presets

Enable/Disable GUI (disabling GUI enables headless mode)

Specify heading (yaw) angle (Psi) Den Steuerkurs angeben

Show the most relevant command line options Die wichtigsten Kommandozeilenoptionen zeigen.

Enable/Disable the move to hold short position for multiplayer

Enable/Disable celestial body growth illusion near the horizon

Enable http server on the specified address. Specify the port or address:port to bind to. Einen HTTP-Server auf Adresse:Port aktivieren

Enable/Disable 3D HUD

Hud displays percentage of triangles culled HUD zeigt Prozent der unterdrückten Grundobjekte

Enable/Disable Heads Up Display (HUD)

Hud Options HUD-Optionen

Hud displays number of triangles rendered HUD zeigt Anzahl der gerenderten Grundobjekte

Open connection using the International Gliding Commission protocol

Enable/Disable ignoring the autosave file, i.e. the settings saved in this file will not be loaded during startup, nor will the settings be saved to this file when closing the simulator

Enable/Disable starting in air (implied when using --altitude) In der Luft starten (impliziert bei Verwendung von --altitude)

IO Options I/O-Optionen

Open connection to an Agwagon joystick Eine Verbindung zu einem Agwagon-Joystick öffnen

Enable screen shot http server on the specified port (replaced by --httpd) Screenshot-HTTP-Server am angegeben Port aktivieren

Log JSBSim properties in a CSV file. An output directives file contains an <output type="CSV"></output> element, within which should be specified the parameters or parameter groups that should be logged.

Open connection to a remote joystick Eine Verbindung zu einem Remote-Joystick öffnen

Enable/Disable printing a report in JSON format on the standard output, giving information such as the FlightGear version, $FG_ROOT, $FG_HOME, aircraft and scenery paths, etc. Einen Report im JSON-Format ausgeben. Enthält Details über die FlightGear Version und Einstellungen.

Select the language for this session Auswahl der Sprache

Starting latitude (south = -) Start bei Breitengrad (Süden = -)

Enable/Disable GUI launcher Benutze das grafische Startprogramm

Select aircraft livery Lackierung des Flugzeugs auswählen

Enable/Disable encode video while replaying tape specified by --load-tape

Load recording of earlier FlightGear session. For <name>, if <name> ends with ".fgtape" it is treated as the local path of the recording file; otherwise we form the local path by prepending <name> with the tape directory and appending ".fgtape". For <url> (starting with http:// or https://) we download the remote recording (which must be a Continuous recording) in the background to a url-dependent filename while replaying it; if the url-dependent filename already exists it is assumed to be a truncated download and we only download any remaining data. Eine frühere FlighGear-Session laden

Set fixed-dt mode while replaying tape specified by --load-tape

local aircraft time

Specify the detail levels, where levels are a space-separated numeric list of levels. The default is "1 3 5 7 9".

Specify the range multiplier (point from low to fine detail). Defaults is 2.

Specify the resolution of the terrain grid. Defaults is 1.

Specify the method of texturing the terrain. The default is bluemarble.

Specify which logging class(es) to use Die zu verwendende(n) Log-Klasse(n) angeben

Log to directory DIR. The special value 'desktop' causes logging to the desktop (OS-dependent location). This option may be given several times, using a different value each time. Inside the specified directory, the written log file is named FlightGear_YYYY-MM-DD_<num>.log, where <num> takes the values 0, 1, 2, etc. Logverzeichnis. Kann mehrfach mit unterschiedlichen Werten angegeben werden.

Specify which logging level to use Das zu verwendende Log-Level angeben

Starting longitude (west = -) Start bei Längengrad (Westen = -)

Specify initial mach number Anfängliche Mach-Zahl angeben

Specify the materials file used to render the scenery (default: Materials/regions/materials.xml) Die Materials-Datei angeben, die zur Darstellung der Szenerie verwendet wird (Standard: materials.xml)

Maximum frame rate in Hz. Die maximale Bildrate in Hz

Pass a METAR string to set up static weather (this implies --disable-real-weather-fetch) Einen METAR eingeben, um statisches Wetter einzustellen

Allows you to define a minimum status level (=development status) for all listed aircraft Schränkt die Anzeige auf Flugzeuge mit diesem minimalem Status ein

Run the FDM this rate (iterations per second) FDM mit dieser Frequenz betreiben (Wiederholungen pro Sekunde)

Enable/Disable extra mouse pointer

(i.e. for full screen Voodoo based cards)

Specify multipilot communication settings; Multiplayer-Einstellungen angeben

MultiPlayer Options Multiplayer-Optionen

multiple instances can be used

Open connection using the FG Native Controls protocol Eine Verbindung per FG Native Controls-Protokoll öffnen

Open connection using the FG Native protocol Eine Verbindung per FG Native-Protokoll öffnen

Open connection using the FG Native FDM protocol Eine Verbindung per FG Native FDM-Protokoll öffnen

Open connection using the FG Native GUI protocol Eine Verbindung per FG Native GUI-Protokoll öffnen

Set the NAV1 radio frequency, optionally preceded by a radial. Frequenz des NAV1-Funkgeräts angeben, optional mit vorangestelltem Radial

Set the NAV2 radio frequency, optionally preceded by a radial. Frequenz des NAV2-Funkgeräts angeben, optional mit vorangestelltem Radial

Specify starting position relative to an NDB Startposition relativ zu einem NDB angeben

Specify the frequency of the NDB. Use with --ndb=ID Frequenz des NDB angeben. Verwendung zusammen mit --ndb=ID

Network Options Netzwerk

Open connection using the NMEA protocol Eine Verbindung per NMEA-Protokoll öffnen

Enable/Disable not loading any default configuration files (like .fgfsrc) unless explicitly specified with --config

Enable/Disable not attempting to trim the model Das Flugzeug NICHT trimmen

(only with --fdm=jsbsim) (nur mit --fdm=jsbsim)

Specify heading to reference point Kurs relativ zum Referenzpunkt

Specify distance to reference point (nautical miles) Distanz zum Referenzpunkt angeben (Statute Miles)

Enable/Disable starting at ground level (default enabled) Auf dem Boden starten (Standard)

Open connection using the OpenGC protocol Eine Verbindung per OpenGC-Protokoll öffnen

Enable/Disable instrument panel

Specify parking position at an airport (must also specify an airport) Auswahl einer Parkposition am ausgewählten Flughafen

Same as the --parking-id option Eine Parkposition auf dem angegebenen Flugzeugträger wählen

Specify pitch angle (Theta) Die Längsneigung angeben (griech. Theta)

Initial Position and Orientation Position und Orientierung

After starting the simulator, immediately open the properties dialog with the given property

Set property <name> to <value>. <type> can be one of string, double, float, long, int, or bool Der Property <name> den Wert <value> zuweisen. <type> kann string, double, float, long, int, oder bool sein.

Open connection using the interactive property manager Eine Verbindung öffnen unter Verwendung des interaktiven Property-Managers

Specify which proxy server (and port) to use. The username and password are optional and should be MD5 encoded already. This option is only useful when used in conjunction with the real-weather-fetch option. Den zu verwendenden Proxy-Server (und Port) angeben. Nutzername und Passwort sind frei wählbar und sollten bereits MD5-codiert sein. Nur sinnvoll in Verbindung mit der Option "--real-weather-fetch"

Open connection using the PVE protocol Eine Verbindung per PVE-Protokoll öffnen

Enable/Disable random buildings objects

Enable/Disable random scenery objects (buildings, etc.) (Gebäude, etc.)

Enable/Disable random vegetation objects

Set up random wind direction and speed Zufällige Windrichtung und -geschwindigkeit

Open connection using the Ray Woodworth motion chair protocol Eine Verbindung per Ray Woodworth Motion Chair-Protokoll öffnen

Enable/Disable $FG_HOME read-only

Enable/Disable METAR based real weather fetching

Rendering Options Grafik-Optionen

Enable/Disable automatic opening of the Launcher when exiting FlightGear

Enable/Disable resetting all user settings to their defaults (rendering options etc.) Alle Optionen auf Standard zurücksetzen (Grafik, etc.)

Specify initial climb rate (can be negative) Die anfängliche Steig-/Sinkrate angeben

Specify roll angle (Phi) Den Querneigung angeben (griech. Phi)

Route/Way Point Options Route/Wegpunkt

Open connection using the RUL protocol Eine Verbindung per RUL-Protokoll öffnen

Specify starting runway (must also specify an airport) Auswahl einer Startbahn am ausgewählten Flughafen

Enable/Disable saving preferences at program exit

Enable/Disable crash and error reports from being sent to the development team for analysis

Enable flat shading Harte Schattierung

Enable smooth shading Weiche Schattierung

Print a list of the currently available aircraft types Zeigt eine Liste der verfügbaren Flugzeugtypen

Show a list of available audio device Eine Liste der verfügbaren Audiogeräte anzeigen

Situation Options Situationsoptionen

Enable/Disable sound effects

Explicitly specify the audio device to use Das zu verwendende Audiogerät explizit angeben

Enable/Disable specular reflections on textured objects

Run the FDM 'n' times faster than real time Das FDM mit dem n-fachen der realen Zeit betreiben

Enable/Disable splash screen

Specify a starting date/time with respect to Eine Startzeit angeben relativ zu

Specify the initial state of the aircraft to the given value

system time

Enable telnet server on the specified port Telnet-Server am angegebenen Port aktivieren

Specify the terrain engine you want to use: tilecache or pagedLOD

Enable/Disable automatic scenery downloads/updates

Set target directory for scenery downloads Zielverzeichnis für Szenerie-Downloads

Enable/Disable texture cache (DDS)

Specify the DDS texture cache directory to be different than the default location

Anisotropic Texture Filtering: values should be 1 (default), 2, 4, 8 or 16 Anisotropische Texturfilterung: Wert sollte 1 (Standard), 2, 4, 8, oder 16 sein

Synchronize time with local real-world time Mit Ortszeit synchronisieren

Synchronize time with real-world time Mit Realzeit (UTC) synchronisieren

Add this time offset Zeitverschiebung angeben

Time Options Zeitoptionen

Specify a time of day Eine Tageszeit angeben

Trace the reads for a property; Lesezugriffe auf eine Property verfolgen

Trace the writes for a property; Schreibzugriffe auf eine Property verfolgen

Enable/Disable trim the model Das Flugzeug trimmen

(only with --fdm=jsbsim) (nur mit --fdm=jsbsim)

Specify turbulence from 0.0 (calm) to 1.0 (severe) Angabe der Stärke der Turbulenz von 0.0 (gar keine) bis 1.0 (sehr stark)

Specify velocity along the body X axis Geschwindigkeit entlang der X-Achse des Flugzeugs angeben

Remove $FG_HOME directory. For Windows, it additionally removes TerraSync, Aircraft and TextureCache directories from download directory.

Use feet for distances Fuß für Entfernungen verwenden

Use meters for distances Meter für Entfernungen verwenden

Usage: fgfs [ option ... ] Aufruf: fgfs [ Optionen ... ]

Use with --terrain-engine=pagedLOD

Specify velocity along the body Y axis Geschwindigkeit entlang der Y-Achse des Flugzeugs angeben

Specify velocity along a vertical axis Geschwindigkeit entlang der Hochachse angeben

Specify velocity along a West-East axis Geschwindigkeit in Ost-West-Richtung angeben

Specify velocity along a South-North axis Geschwindigkeit in Nord-Süd-Richtung angeben

Specify initial airspeed Anfangsgeschwindigkeit angeben

Same as the --aircraft option Wähle ein Profil gemäß top level <name>-set.xml

Show all command line options when combined with --help or -h Zeigt die vollständige Liste aller Kommandozeilenoptionen (mit --help oder -h kombinieren)

For a complete list of options use --help --verbose Anzeigen der vollständige Liste aller Optionen mit --help --verbose

Enable/Disable display the current FlightGear version Zeigt die aktuelle FlightGear Version

Specify the default forward view direction as an offset from straight ahead. Allowable values are LEFT, RIGHT, CENTER, or a specific number in degrees Die standardmäßige Nach-Vorne-Blickrichtung angeben als Abweichung von geradeaus. Erlaubte Werte sind LEFT, RIGHT, CENTER, oder eine Winkelangabe in Grad

Specify initial visibility in meters Die anfängliche Sichtweite in Metern angeben

Specify initial visibility in statute miles Die anfängliche Sichtweite in Meilen angeben

Specify starting position relative to a VOR Startposition relativ zu einem VOR angeben

Specify the frequency of the VOR. Use with --vor=ID Die Frequenz des VOR angeben. Verwendung zusamen mit --vor=ID

Enable/Disable virtual reality

Specify velocity along the body Z axis Geschwindigkeit entlang der Z-Achse des Flugzeugs angeben

Specify wind coming from DIR (degrees) at SPEED (knots) Windrichtung und -geschwindigkeit in Grad und Knoten angeben

Enable/Disable wireframe drawing mode

Specify a waypoint for the GC autopilot; Wegpunkt für den Autopiloten angeben

binding subsystems Binde Subsysteme

creating subsystems Erzeuge Subsysteme

downloading scenery Herunterladen der Szenerie

Error loading 3D model

Errors occurred loading aircraft systems (fuel, electrical, hydraulics)

Audio FX description contains errors

Errors loading terrain (BTG)

The add-on '%VALUE%' contains errors. Please report this to the add-on developers.

This aircraft (%VALUE%) contains errors. This may include visual issues, or the aircraft might not fly at all. Check for an updated version of the aircraft from its developers.

The selected aircraft (%VALUE%) contains errors. This may cause visual issues, or the aircraft might not fly at all. Please report the information below to the aircraft hangar's maintainers.

The custom scenery at '%VALUE%' contains errors. Parts may be missing, or the scenery may not load at all. Check for an updated version of the scenery.

Errors were found loading the core simulator files (FGData). This usually indicates a problem with the installation, or your local disk.

The joystick (input device) '%VALUE%' couldn't be loaded correctly. This usually means its configuration file is incorrect.

Loading a model for another pilot (via multi-player) failed. The other pilot will appear as a default model. (You can disable these errors from the multiplayer settings dialog)

Network errors occurred while downloading data. Check your network connection is working correctly.

Allocating memory failed. Some resources will not be loaded. Adjust your settings to reduce view distance or number of objects loaded.

The scenario '%VALUE%' contains errors, and may not work correctly.

Problems occurred loading visual effects (shaders). This can cause objects to be invisible or appear incorrect. It can sometimes be fixed by changing rendering settings inside FlightGear, or occasionally, by updating the drivers for your graphics card.

The shared models data is missing or incomplete. This means all scenery will be missing some 3D models. To fix this, please enable automatic scenery download or download the current shared models data from https://www.flightgear.org/scenery/shared-models

Scenery downloaded via TerraSync is not loading correctly. The usually indicates a problem with your network connection or local disk.

Problems occurred loading simulated aircraft traffic: some traffic may not appear.

Errors occurred in an unknown part of FlightGear. Please report this bug to the FlightGear development team.

Errors loading user-interface

Errors loading input device configuration

Texture failed to load

Shader / Effect problems

This dialog is work-in-progress. The information included above may not be fully correct, so please check the detailed information below and give feedback if something seems wrong. Please include all the information below, as well as the message above.

Errors loading scenery

Errors downloading scenery from TerraSync

File or resource is invalid or corrupted

File or resource header is incorrect

Unable to read/write files correctly (check permissions and disk space)

The resource contains a configuration problem

Network connection failure

The file or resource was not found

Unable to allocate sufficient memory

Unknown error

Scripted loading of XML failed

Errors loading model XML

finalizing position Vorbereiten der Ausgansposition

finalizing subsystems Finalisiere Subsysteme

initializing Initialisiere

initializing graphics engine Initialisiere Grafik

initializing scenery Initialisiere Szenerie

initializing subsystems Initialisiere Subsysteme

Licensed under the GNU GPL. See https://www.flightgear.org for more information.

loading aircraft Lade Flugzeug

loading aircraft list Lade Flugzeugliste

loading navigation data Lade Navigationsdaten

loading scenery Lade Szenerie

loading fixes Lade Fixes

[VALUE]% complete [VALUE]% abgeschlossen

loading airport data Lade Flughäfen

loading navigation aid data Lade Navigationshilfen

loading points of interest Lade POIs

reading airport data Lese Flughäfen

extracting [VALUE]

Saved settings were migrated from a previous version of FlightGear. If you encounter any problems when using the system, try restoring the default settings, before reporting a problem. Saved settings can affect the appearance, performance and features of the simulator. Es wurden gespeicherte Einstellungen von der vorherigen FlightGear-Version übernommen. Bei Problemen zunächst die Standard-Einstellungen wiederherstellen. Gespeicherte Einstellungen können Leistung und Funktion des Simulators negativ beeinflussen.

Settings migrated Einstellungen wurden übernommen

The shared scenery models are not installed correctly. This will cause missing elements in all scenery. Enable automatic scenery download, or download the shared models from https://www.flightgear.org/scenery/shared-models and add them to your scenery list.

The shared scenery models have not downloaded correctly. This will cause missing elements in all scenery. Automatic scenery download is enabled, check your network connection is working as expected.

Missing shared models

KB/s

MB/s

Unstable nightly build - some features may be under active development Entwicklerversion: Kann instabile/unfertige Features enthalten!

Drag while holding the right mouse button to look around Zum Steuern der Blickrichtung die Maus bei gedrückter rechter Taste bewegen!

Hold Ctrl while looking around to move the view up, down, left or right Halte beim Ändern der Blickrichtung [Shift] gedrückt, um den Blick nach oben/unten/links/rechts zu bewegen.

Press a/A to adjust the simulation speed Tasten a/A drücken, um die Simulationsgeschwindigkeit anzupassen.

Press x/X to zoom in and out Drücke x/X um rein oder raus zu zoomen

Find frequencies of nearby ATC services from the Radios dialog Die Frequenzen der umliegenden ATC Stationen können über den Radio-Dialog gefunden werden.

Press v to change your viewpoint, Ctrl-V to return to the cockpit Drücke v, um die Perspektive zu wechseln. Strg-V kehrt ins Cockpit zurück.

Press F3 to take a screenshot Drücke F3, um ein Bildschirmfoto zu erstellen.

Join the FlightGear community at https://forum.flightgear.org Trete der FlightGear Community bei: http://forum.flightgear.org

Press h to bring up a Heads Up Display Drücke h, um das Head-Up-Display zu aktivieren.

Show or hide the menu bar by pressing F10 Drücke F10, um die Menüzeile ein-/auszublenden.

Frame-rate too low? - try disabling AI traffic Ruckelt die Simulation? Versuche z.B. den KI Verkehr abzuschalten.

Select Environment → Weather to fly in different weather Wähle Umwelt → Wetter, um in verschiedenen Wetterlagen zu fliegen.

Press F12 to change the radio frequencies easily Drücke F12, um die Funk-Frequenzen einzustellen!

Look around by holding down the right mouse button and moving the mouse Zum Steuern der Blickrichtung die Maus bei gedrückter rechter Taste bewegen!

Select Multiplayer → Multiplayer Settings to join the shared flight environment Wähle Multiplayer → Multiplayer Konfiguration um gemeinsam mit anderen Piloten zu fliegen!

Can't get the engine started? - see Help → Aircraft Checklists Probleme den Motor zu starten? Siehe Hilfe → Flugzeug Checklisten

Drag while holding the middle and right mouse buttons to move the viewpoint Zum Steuern des Blickpunkts die Maus bei gedrückter mittlerer und rechter Taste bewegen!

Press / to explore the internals of the simulator Drücke "/", um Interna des Simulators zu erkunden!

Press Tab to move the viewpoint with your mouse and use the scroll wheel to zoom Drücke TAB, um den Blickpunkt mit der Maus zu bewegen und mit dem Scroll-Rad zu zoomen!

The border of a high pressure region, in which the airmass becomes unstable and various convective and stratiform clouds may appear. Grenze eines Hochdruckgebietes, in dem Luftmassen instabil werden und sich vielfältige konvektive und stratiforme Bewölkung bilden kann.

Border of a high pressure region Grenze eines Hochdruckgebietes

The border of a low pressure region, in which the airmass is unstable and convective clouds start to form layers and merge into stratiform clouds. Grenze eines Tiefdruckgebietes, in dem Luftmassen instabil sind und sich konvektive Wolkenschichten bilden, die in stratiforme Bewölkung übergehen.

Border of a low pressure region Grenze eines Tiefdruckgebietes

If you just got your IFR rating, this is what you are allowed to do. But can you? Wenn Du gerade Dein IFR-Rating bekommen hast, ist dies das maximal Erlaubte.

CAT I minimum CAT I Minimum

This is expert level. You will barely see the taxiway from the cockpit, even if you are on ground. Fog and light drizzle, freezing level at 1000ft. Dies ist für Experten. Du wirst vom Cockpit aus gerade noch die Bahnmarkierungen sehen. Nebel und leichter Regen, einsetzende Vereisung ab 1000ft.

CAT IIIb minimum CAT IIIb Minimum

With just a 1/4 mile visibility and clouds at 100ft, you don't see much of the runway until seconds before touchdown. Trust your instruments to stay alive. Mit einer 1/4 Meile Sicht und Wolken bis 100ft wirst Du bis kurz vor dem Aufsetzen nicht viel sehen. Vertraue den Instrumenten, um zu überleben.

CAT II minimum CAT II Minimum

The center of a high pressure region, characterized by descending air and hence only weak cloud development with high visibility. Zentrum eines Hochdruckgebietes, charakterisiert durch fallende Luftmassen und nur schwache Wolkenentwicklung mit sehr guter Sicht.

Core high pressure region Zentrum eines Hochdruckgebietes

The core of a low pressure region, characterized by overcast clouds, bad visibility on the ground and significant rainfall. Zentrum eines Tiefdruckgebietes, charakterisiert durch bedeckende Wolkenschichten, schlechte Sicht am Boden und erheblichen Regen.

Core low pressure region Zentrum eines Tiefdruckgebietes

Fog developed this autumn's morning. Expect good visibility above the layer. However - getting through it can be a challenge. Stay alive for a 500' climb and you'll see the sun! Ein nebeliger Herbstmorgen. Über dem Nebel ist gute Sicht zu erwarten, den Nebel zu durchfliegen ist eine Herausforderung. Bleib am Leben und Du siehst die Sonne!

Early morning fog Nebel am frühen Morgen

A lovely day for trip to your favorite 100$ hamburger airfield Ein herrlicher Tag für einen Ausflug zu Deinem bevorzugten 100€ Hamburger Flugplatz

Fair weather Schönes Wetter

A high pressure region, characterized by moderate to strong Cumulus development in the afternoon and fairly good visibility conditions. Ein Hochdruckgebiet, charakterisiert durch moderate bis starke Cumulus-Entwicklung am Nachmittag und recht gute Sichtbedingungen.

High pressure region Ein Hochdruckgebiet

A standard atmosphere model for testing and calibrating aircraft performance and design.

International Standard Atmosphere

Fetch live weather data for your nearest airport from noaa.gov. You need a working internet connection. Weather is generated automatically, once a valid METAR is received. Hole Wetter-Echtdaten für den nächstgelegenen Flughafen von noaa.gov. Es ist eine Internet-Verbindung nötig. Wetter wird automatisch erzeugt, sobald ein gültiger METAR vorliegt.

Live data Wetter-Echtdaten

A low pressure region, characterized by rising air, widespread formation of stratiform clouds and beginning rain. Ein Tiefdruckgebiet, charakterisiert durch steigende Luftmassen, verbreitete Formation von stratiformer Bewölkung und beginnenden Regen.

Low pressure region Ein Tiefdruckgebiet

Enter your favorite METAR weather. A valid METAR syntax is required. Gib Dein bevorzugtes Wetter als METAR ein. Es muss ein gültiger Ausdruck sein.

Manual input Manuelle Eingabe

After the storm - limited visibility and some showers. Go or No-Go? Nach dem Sturm - Eingeschränkte Sicht, Regenschauer. Go or No-Go?

Marginal VFR Grenzwertige VFR-Bedingungen

You're out for an adventure? Gusty winds blowing from the west and isolated thunderstorms should be avoided. Fasten your seatbelt! Du bist auf ein Abenteuer aus? Böige Winde aus West und einzelne Gewitterzellen sollten vermieden werden. Bitte anschnallen!

Stormy Monday Stürmischer Montag

A hot and damp summer day with thunderstorms developing in the afternoon. Be prepared for reduction of visibility in showers and strong gusts near thunderstorms Ein heißer und feuchter Tag mit sich entwicklenden Gewittern am Nachmittag. Sei vorbereitet auf reduzierte Sicht in Schauern und starke Böen in Gewitternähe

Thunderstorm Gewitter

A warm sector, characterized by high moisture in the air and haze extending up to high altitudes, but otherwise largely convective cloud development. Ein warmer Abschnitt, charakterisiert durch hohe Luftfeuchtigkeit und Dunst bis in große Höhen, dazu größtenteils konvektive Wolkenentwicklung.

Warm sector Warmer Abschnitt

Exit FlightGear?

Exit

FlightGear This is the title of the Exit dialog.

NDB Label corresponding to a radio button

NDB: Label corresponding to a text input field

VOR Label corresponding to a radio button

VOR: Label corresponding to a text input field

Aircraft Carrier Label corresponding to a radio button

Airport

Airport:

Airspeed (kt):

Altitude (ft):

Azimuth (°):

Position: Position selection on an aircraft carrier

Carrier:

Distance (nm):

Fix Label corresponding to a radio button

Fix: Label corresponding to a text input field

Glidepath (°):

Heading (°):

Latitude:

Position Aircraft In Air This is the dialog title.

Longitude:

Coordinates

Relative Position Title

Runway:

Okay

Apply

Cancel

Help

Reset

Revert

Advanced Graphics Options This is the dialog title.

Atmospheric Light Scattering uses a sophisticated physical atmospheric model and several other effects to give realistic rendering of large distances. It is recommended to run this configuration on relatively powerful hardware.

Atmospheric Light Scattering (ALS)

Anti-aliasing

Disabled This is about Anti-aliasing.

MSAA 2x This is an Anti-aliasing setting.

MSAA 4x This is an Anti-aliasing setting.

MSAA 8x This is an Anti-aliasing setting.

Atmospheric Effects

Autogenerated Vegetation

Disabled This is about Autogenerated Vegetation.

High Density This is about Autogenerated Vegetation.

Low Density This is about Autogenerated Vegetation.

Medium Density This is about Autogenerated Vegetation.

Ultra High Density This is about Autogenerated Vegetation.

Ultra Low Density This is about Autogenerated Vegetation.

Very High Density This is about Autogenerated Vegetation.

Very Low Density This is about Autogenerated Vegetation.

Buildings

Disabled This is about Buildings in the Advanced Graphics Options dialog.

OpenStreetMap Data This is about Buildings in the Advanced Graphics Options dialog.

Randomly Generated This is about Buildings in the Advanced Graphics Options dialog.

Cloud density

Cloud visibility range

Clouds Detail

High This is about Clouds Detail.

Low This is about Clouds Detail.

High This is about Terrain Quality.

Low This is about Terrain Quality.

Medium This is about Terrain Quality.

Ultra This is about Terrain Quality.

Detailed Roads and Railways

Disabled This is about Detailed Roads and Railways.

Enabled This is about Detailed Roads and Railways.

Dynamic lighting

General Heading in the Advanced Graphics Options dialog

Some of these settings can only be changed when using ALS.

Limit the number of lights being displayed

The Low Specifications render mode provides low quality visuals with maximum compatibility. This setting is recommended for users with less powerful hardware or integrated video cards.

Low Specifications

Maximum number of point lights

Maximum number of spot lights

Model Effects

Disabled This is about Model Effects.

Enabled This is about Model Effects.

OpenStreetMap Trees

Disabled This is about OpenStreetMap Trees.

Enabled This is about OpenStreetMap Trees.

Overlay

Disabled This is about Overlay in the Advanced Graphics Options dialog (/sim/gui/dialogs/advanced/overlay).

Enabled This is about Overlay in the Advanced Graphics Options dialog (/sim/gui/dialogs/advanced/overlay).

Particles (smoke, dust, spray) This is a checkbox in the Advanced Graphics Options dialog.

Precipitation This is a checkbox in the Advanced Graphics Options dialog.

Basic This is about Pylons and power lines.

Pylons and power lines

Detailed This is about Pylons and power lines.

Disabled This is about Pylons and power lines.

Random Scenery Objects

Disabled This is about Random Scenery Objects.

Enabled This is about Random Scenery Objects.

Scenery Layers

Scenery Objects

Disabled This is about Scenery Objects in the Advanced Graphics Options dialog.

Enabled This is about Scenery Objects in the Advanced Graphics Options dialog.

Select Rendering Mode

Shadow Quality

Disabled This is about Shadow Quality.

High This is about Shadow Quality.

Low This is about Shadow Quality.

Medium This is about Shadow Quality.

Ultra This is about Shadow Quality.

Shadows and Lights

Terrain Quality

3D clouds (required by Detailed Weather)

Use Shaders

Vegetation Shadows

Disabled This is about Vegetation Shadows.

Enabled This is about Vegetation Shadows.

Warning: Pylons, Detailed Roads, Buildings use a lot of memory and disk space, and are only available in limited areas. This uses manual line wrapping for now, which is not ideal; see https://gitlab.com/flightgear/flightgear/-/work_items/3171

Water Effects

Disabled This is about Water Effects.

High This is about Water Effects.

Low This is about Water Effects.

Wind Effects

Disabled This is about Wind Effects.

Enabled This is about Wind Effects.

Advanced Options

Animated jetways

Custom Whether to use custom rendering settings

%2d m %d = number of meters for “Elevation delta below airports”

Elevation delta below airports

Use disk space for faster loading (DDS Texture Cache)

Compensate field of view for wider screens

%2.0f FPS

Graphics Quality

%d Value of /sim/rendering/max-paged-lod

Maximum number of aircraft and scenery tiles cached

Warning: High values use a lot amount of memory and GPU

Rendering Options This is the dialog title.

Some changes require a complete restart to be applied.

Satellite Photoscenery

Save custom settings to file

Warning: Your graphics card may not support complex graphics.

Tessellation

Limit frame rate

Use triangles for directional lights

Use point sprites for runway lights

WS3.0 (Experimental - requires OSG 3.6)

Wireframe

"%s" Specific Views %s = name of the selected aircraft

Autohide cursor in This is followed by a input field allowing one to enter a number of seconds

Autohide menubar

default Chat and event log position

left Chat and event log position

Display Options

second(s)

Hide 2D panel in non-centered view

Hide 2D panel in non-cockpit view

Legacy multiplayer view selector

Marker Pins

Other Views

Select Active Views

Chat and event log position (requires restart):

Show 2D panel

POI POI = Points Of Interest

Airports

Show chat messages

Fixes

Show frame rate

Show frame spacing

Show

Navaids

Show Pilot Model This option is not always visible (it depends on a property).

Show tooltips

Traffic

Standard Views

unnamed view %d %d = view number

View Options This is the dialog title.

High quality settings with the most demanding features disabled.

High Name of a graphics preset

Prioritize performance over eye candy.

Low Name of a graphics preset

A nice tradeoff between performance and eye candy.

Medium Name of a graphics preset

Minimal settings for low-power laptops or very old systems.

Minimal Name of a graphics preset

Maximum settings for very powerful systems.

Ultra Name of a graphics preset